You are here: >>> System Guide >>> Interior Systems
EMOTON Bio Innendämmung - Innenausbau-System
| EMOTON INTERIOR SYSTEMS |
Das Aktiv-Innenausbausystem-die "coole" Alternativ
The sun generates when striking the roof tile heat. The majority penetrates the roof. The insulation behind it (usually mineral wool) can be according to their heat storage by the heat at different rates. With too rapid heat transfer is too much heat in a short time in the living room
===> Overheating (Barack climate)
When Active Interior System is saved by a special combination of wood fiber board and Tonputz and heavily delayed, the heat supplied to the room. The Tonputz made by the heat and water produced by evaporation.
The warmth of the sun only comes at a moment in the living room, where the cool roof to the outside world again.
At night, moisture is absorbed and thus the temperature is kept constant.
The curve shows the rapid temperature rise in conventional construction methods and the high heat loss in the asset Interior Systems!
As Lathing Heraklith BM used or Blockboard. Which Lathing for your property is the right one, please refer to the application guidelines.
The Tonputz layer is applied, reinforced with a fiberglass fabric with a specially developed coating and painting instead of the color Glättputz revised. This is achieved with two operations, the finished surface.
Thus, working and drying time can be saved and associated also some money!
Even unusual design ideas you can easily achieve with this system. For the Fibreboard have greater flexibility than mineral plates and connections can be difficult with the active EMOTON joint filler and the wood fiber EMOTON fittings easily be achieved. The surfaces can be painted, both of which can be rolled or trowel, designed for everyone through the thin plaster,
To also allow the wall and ceiling heating, we have the assets Kapillarheizsystem ready for you. The Kupferkapillaren ensure, through their construction and the high conductivity of copper for incredible results. With flow temperatures of 35 ° C wall surface temperatures were measured up to 33 ° C. Therefore, less wall heating surface is needed and this saves money! In addition, enough for this system a plaster thickness of up to 1 cm. It may even be substantial savings.
The biological quality is excellent through the materials used. The properties of the active-treat system and the Interior Tonputz conjures with its beautiful natural colors and its gentle glint atmosphere in any room.
